- Home
- Equipment
Refine by
Pce Instruments Xprt Equipment & Supplies
30 equipment items found
Manufactured by:PCE Instruments based inMeschede, GERMANY
The PCE-RT 1200 is a handheld roughness tester used to determine surface roughness. The roughness tester is used in the laboratory, in production and otehr areas of application. The measured values are displayed on the easy-to-read OLED display and the meter can store up to 20 measured values that can later be read out via the micro USB interface. An evaluation software as well as a USB cable is ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
Meet ISO, ANSI, DIN and JIS standards with PCE-RT 2200, a portable surface roughness tester with an easy-to-read LCD display, large internal memory and convenient USB port. Ideal for taking quick and accurate measurements of surface texture roughness, the PCE-RT 2200 roughness tester uses a digital signal processing (DSP) chip for high-speed data processing and control with low-power ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The force gauge measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gauge is supplied with an external measuring cell. Depending on the model, the force ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The force gauge measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gauge is supplied with an external measuring cell. Depending on the model, the force ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The force gauge measures both tensile and compressive forces with very high resolution. The tensile force and the compressive force are often determined in the test laboratory, for example, to determine the yield strength, the pull-off force, and the force required to actuate a push-button or switch. The force gauge is supplied with an external measuring cell. Depending on the model, the force ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
PCE-DFG N 200 Digital Dynamometer for tensile force measurement and pressure force measurement up to 200 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips / USB interface / Software / Calibration certificate A digital force gauge for tensile and compressive force measurements up to 200 N is available with the PCE-DFG N 200. The PCE-DFG N 200 is a digital force meter for ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
PCE-DFG N Digital Dynamometer for tensile force measurement and pressure force measurement up to 20 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips / USB interface / Software / Calibration certificate. A digital force gauge for tensile and compressive force measurements up to 20 N is available with the PCE-DFG N 20. The PCE-DFG N 20 is a digital force meter for precise ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
For pH, redox and temperature / Large, easy-to-read display / SD card memory (1 ... 16 GB), stored data is saved as an Excel file / RS-232 interface and optional software for direct transfer to the ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
Force gauge for tensile force measurement and pressure force measurement up to 200 N USB interface and evaluation software for data transmission / Many measuring ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
For Simulation and Measurement of Current and Voltage / Li-Ion battery / Continuity tester / Ramp function / Data logger. The process calibrator PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the process calibrator to be used to set process displays, data loggers, paperless recorders, etc. Thanks to the galvanically isolated connections, this ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
For Simulation and Measurement of Current and Voltage / Li-Ion battery / Continuity tester / Ramp function / Data logger. The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage data logger to be used to set process displays, data loggers, paperless recorders, etc. Thanks to the galvanically isolated ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
Simulation and Measurement of Resistance & Pt Sensors, Current and Voltage / Li-Ion Battery / Continuity Checker / Ramp Function. The RTD process calibrator PCE-RTD 20 is used to simulate resistors and resistance temperature sensors. Thus, the RTD process calibrator is able to be used as a calibrator for temperature measuring devices. In addition to the simulation of resistors, the RTD ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The data loggers of the PCE-VDL series are available in two versions. The data logger PCE-VDL 16I contains sensors for the following physical units: temperature, humidity, air pressure, light and 3-axis acceleration. The max. sampling rate of the acceleration sensor is 1600 Hz, the remaining sensors are sampled with max. 1 Hz. With the data logger PCE-VDL 24I the acceleration sensor is even ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The cable detector is used for detecting cables and power lines in walls. This cable detector is both a transmitter and receiver. The transmitter of the cable detector has a connector that can be connected to a power connector (max. 240 VAC) and emits acoustic signal for live cables. It can follow the signal of a cable with the receiver from the wall to the fuse. If the cable detector finds an ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The Odometer PCE-MW 1 can measure up to 9999,9 meters. The Odometer PCE-MW 1 has a robust construction to operate in harsh environmental conditions. The wheel of the Odometer PCE-MW 1 automatically measures up to 9999,9 meters. The Odometer PCE-MW 1 is the ideal instrument to measure cables, pipelines, fences, construction works, industrial areas, sports installations, agricultural plants, etc. ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The PCE-TAT 10 Adhesion Tester is an essential tool for measuring the adhesion strength of paints and other coatings. Designed with user-friendliness in mind, this mechanical tensile adhesion tester allows for quick and straightforward testing, enabled by rapid-curing adhesive. It operates by adhering a dolly to the coating surface, which, once set, is pulled off using a spring mechanism. The ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The PCE-360 is a versatile single-phase power meter designed to provide comprehensive electrical power analysis in both single-phase and three-phase systems. It functions as a power-analyzing clamp meter with an integrated data logger capability, enabling users to capture power measurements in real time and over extended periods, up to 578 days at a 5-second sample rate. The meter is equipped to ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The PCE-GMM 10 grain moisture meter by PCE Instruments is crafted to accurately measure moisture content across 18 grain types, including wheat, maize, and soybeans. It is an essential tool in preventing spoilage by enabling precise moisture control, crucial for ensuring grain quality during storage and post-harvest processing. Featuring a measurement range from 4.5% to 40%, and automatic ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
Our professional PCE-322 A noise meter is suitable for taking measurements in the industrial sector, health and safety sectors, and to control internal environments such as those with noise contamination. The noise meter internal memory of 32,700 values makes it possible to be used for long periods of time and to save data. The data of the noise meter can be transferred to PC via USB cable. The ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The electromagnetic radiation detector PCE-EMF 823 is a had-held device to determine Tesla or micro Gauss radiation. The electromagnetic radiation detector PCE-EMF 823 has been specially designed to measure electromagnetic radiations in electrical appliances such as televisions, lamps, computers, conductors, screens and industrial electrical installations. With the electromagnetic radiation ...